Overview
Control your feeder from the palm of your hand! With the new Universal Bluetooth® Timer and the Moultrie Bluetooth® Timer App, you can program feed times without having to get up close and remove the housing on your feeder kit. Whether you're checking feeders on your property from your truck, side-by-side, or on foot, this new timer allows you to make changes from up to 100 feet away, making maintenance trips more efficient.
Key functions of this new timer and app:
- Program feeds: Schedule up to 10 different feeds per day on specific days of the week. Feed times can be set for 1-60 seconds in duration, and you can choose from Hi/Med/Low motor speeds. Toggle times on and off as needed when in range.
- New random mode: Keep wildlife guessing! Random mode will feed twice per day at various times — once in the morning before 12:00 PM and one after 12:00 PM, with a minimum of 3 hours between feed times.
- Testing: Perform test runs of up to 60 seconds while setting up or checking your feeder.
- Status check: View estimated feed days remaining, even when you're out of range. You'll know at a glance when you need to grab more corn before making trips for fill-ups!
Note: You must be in range to change feed settings; however, you can always view last measured battery status and current estimated remaining feed.
Pro tip: Outfit multiple feeders with this new timer and control them all in the same app! The app allows you to customize each feeder's name for convenience.
Specifications
- Feeder timer with Bluetooth® wireless technology
- Adjust feeder settings via Moultrie Bluetooth® Timer App from up to 100 ft. from timer
- Schedule up to 10 daily feeds (1-60 seconds each)
- Toggle specific days of the week for each feed time
- Hi/Med/Low speed settings
- Includes random mode and test function
- Durable plastic housing
- Compatible with most 6V and 12V feeders, including Moultrie Ranch Series® feeders
- Not compatible with Moultrie All-In-One feeder kits
- Compatibility with the NXT Hunter Feeder Kit requires removal of the shocking circuit
QUICK START GUIDE
1. Download the Moultrie Bluetooth® Timer App: App Store | Google Play
2. After removing the old timer, install the Universal Bluetooth® Timer into your Moultrie feeder kit using the pre-installed Phillips head screws. If applicable, reuse the existing Phillips head screws to secure external power connected to the feeder kit; additional screws not included. (Secure the external power connector out of the way if unused.)
3. Connect the motor to the timer as seen below.
4. Connect the 6V 5ah or 12V 7ah DC battery with the red timer wire to the positive battery terminal and the black timer wire to the negative battery terminal. DO NOT REVERSE POLARITY OF THE BATTERY LEADS.
Do not let the battery leads come in contact with one another while connected to a battery. This can cause personal injury or property damage. In no event shall PRADCO be liable for any direct, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of this product. Your use of this product is at your own risk.
5. Open the app, connect, and select your newly added timer from the list on the "My Feeders" screen.
Tips and tricks:
- To remove a paired timer, swipe left on the timer you wish to delete in the "My Feeders" list and press the red button to remove.
- Press the enable/disable toggle to turn off scheduled feed times without deleting them.
- Hold the test button located on the front of the timer to start a 5-second test spin.