ATV Electric Feed Gate

Power Issue

  1. Check the wiring harness to see if the fuse has blown. This is located in the plug part of the harness.
  2. If the fuse is not the issue you will need to return the harness for testing.
  3. If you would like to purchase a replacement wire harness (part # 81634) you can so this by contacting Customer Service at 1-800-653-3334.

Feed Gate will not open/close correctly

  1. The wiring harness will need to be calibrated: Hold the ON/OFF switch at the same time and then release.
  2. If this does not resolve the issue the problem could be a result of the teeth on the slide gate being broken. You can purchase a replacement feed gate (part #81631) by contacting our Customer Service Department at 1-800-653-3334.

Motor is not working

  1. Check to see if you can turn the motor by hand. If you are able to do this, the issue could be with the wire harness (refer to Electric Feed Gate Power Issue).
  2. If the motor will not turn by hand it is defective and you will need to contact Customer Service for further assistance at 1-800-653-3334.
Rating: 2.64815