Moultrie 4.3 Viewer

Firmware

Moultrie 4.3 Viewer Firmware Update

NOTE: Make sure your viewer has new batteries installed before you begin the firmware upgrade.  A loss of power or turning the viewer off during the upgrade process will render the viewer unusable, and the viewer will need to be sent to Moultrie for repairs.

This firmware update is designed to enable playback of HD video recorded by 2013 Moultrie game cameras. *

STEP 1:


CLICK HERE to download the Moultrie 4.3 Viewer firmware update.

The firmware has been compressed in a .zip file.  Many computers have an unzip utility pre-installed to open these files. You should be able to double click on the .zip file to open it.

STEP 2:

Copy the firmware upgrade to an empty SD card.


The software file name will be AMAMUPUP.BIN

STEP 3:


Power on the viewer without SD Card (both slots empty).

The screen will show “Insert the SD card”

STEP 4:

Insert the SD card with updated software to the outside SD card slot (under the rubber flap).

The screen will show a message to confirm if you want to upgrade the software. Select “yes” to enter the process.

Do not turn the viewer's power off or remove the battery pack while the 
upgrade is in process.

STEP 5:

After the process is finished the viewer will power off. Remove the SD card and insert an SD card with pictures and video for testing.

*Excludes the ReAction Cam. Please use the software provided with your camera to playback the video from this camera

Rating: 2.78571